Description

Annealing Line We could provide annealing furnace for stainless steel, continuous annealing furnace, and hood-type annealing furnace. Different furnaces can be designed based on different energy source according to your requirement, and different thermal treatment is applied on different processing material. Continuous Annealing Line The technology is that strip is paid off and delivered into the annealing furnace continuously, so that the harden strip can be annealed. There are two kinds of furnace, horizontal furnace and vertical furnace. Process Data Following is the data for the *****0 tons continuous furnace. Furnace Cover Furnace Length Furnace Temp Heating Method Gas-tight welded structure. Inner lining is Alumina silicate refractory and heat-resistant stainless steel plate. **0~**0 m Max **0� Radiant Tube Hood-type Annealing Furnace The technology is that several strip coils are stacked on the coil base, covered with protective cover and heated till annealing temperature, then cooling. There are three kinds of furnace due to different heat sources, such as gas power, fuel oil and electricity. It consists of heating cover (outer housing), furnace base, inner cover, cooling cover, electric control system, vacuum-pumping system and protection gas system Process Data Following is the data for *0 ton gas hood-type annealing furnace Effective Volume of Furnace Max Temp Burner Qty Combustion Heat Ammonia Consumption �***0 �***0 mm **0±5 � *2 *2�*8�**4 k cal 5 Nm³/h Annealing Furnace for Stainless Steel There are many technologies for annealing stainless steel. We can provide annealing-pickling line and bright annealing line. Process Data The following is the data for ****0 ton bright annealing for stainless steel. Strip Thickness 0.*5~0.5 mm Strip Width **0~**0 mm Max. heating Temp Max. ***0±*0� Temp Controlling Method Sectional controlling temperature, intelligent instrument, PID adjustment Length of Line *5~*8 m